Stainless Steel Chains
with all the attributes of natural environment resistant and wear resistant chain series.
Using the utilization of X-rings, durability improved remarkably.
X rings were extra to the Stainless Steel Chain (SS)
which has the top resistance to corrosion and heat. Compared to the standard Stainless Steel Chain,this chain has about 5~10 occasions resistance to abrasion.This improvement makes attainable a large reduction while in the working and upkeep prices.
Recommended uses
?Situations continuously exposed to chemical agents, sea water and wastewater.
Different chemical plants, water treatment plants
?Situations of higher temperature
Heat-treating furnaces, dry furnaces, incinerators
The grease and seal rings meet the requirements on the Foods Sanitation Law.
Seek the advice of us concerning the environmental situations and chain variety.
Selection of chains
The common tensile power and highest allowable load from the Stainless Steel Chain are both reduced than a conventional roller chain. Refer on the maximum allowable load for the selection of chains.
Connecting links
R connecting links are made use of for Stainless Steel Chains #60 or smaller and C connecting links for #80 or greater.
Sprockets
The pins for the X-Ring chains are longer than those of normal roller chains, and thus regular sprockets for multiplex chain cannot be utilised for the X-Ring chains when working with this chain in multiplex.
Caution
Like a common property of stainless steel, anxiety
corrosion cracking and pitting corrosion may be caused by chlorine and chlorine ion (CR-).
Please consider into consideration the problems, temperature, level as well as other total problem when making use of.