CZPT residence elevators belong to the conventional property elevator design and style and are widely used in North America and CZPTpe. Home elevators refer to elevators mounted in personal residences and employed only by a one family members member. It saves development charges and design area to the greatest extent, even though getting care of the visual appeal and aesthetics of the residence.
|Platform dimensions||1200x900mm or CZPT|
one. It can be used indoors or outside.
two. It is easy to set up, no want a pit.
three. It runs stably CZPT sound.
4. It can be CZPT in accordance to your needs.
five. It has two management method: button and distant management.
six. It has emergency descent gadget if power-off scenario takes place.
How To Use:
A. Prior to use:
1. The elevator elevate has been inspected and debugged prior to leaving the manufacturing unit, and all technical indicators have attained the style demands. The user only wants to read through this manual cautiously and strictly comply with the methods when using it.
2. Non-specialists are not permitted to modify the hydraulic method, electrical management program and elevator structural components.
three. When the elevator elevate is installed and employed for the 1st time, cautiously check out whether or not there is any abnormality in the hydraulic stress, electrical appliances, and structural components, and debug it only when there is no abnormality. Perform the load examination after 3 to five occasions of no-load. This action is also applicable after the elevator overhaul.
four. The elevator raise has a guiding construction, carefully verify the verticality and parallelism of the guiding composition, and debug it only soon after confirming that the guiding construction is good. The elevator shall not be loaded for the duration of initial commissioning.
five. For elevator lifts that are out of support for a lengthy time, sections two to 4 of this chapter ought to be implemented ahead of use.
B. Throughout use:
one. The operation of the elevator is created as a fully automatic operation method. Just simply click the corresponding button on the management box to realize the corresponding motion, and the cabin will quit immediately when it reaches the corresponding floor. The realization of these features is recognized by electrical appliances such as AC contactors and restrict switches.
two. No overloading.
C. Right after use (maintenance):
1. Whether there is irregular sound in different elements. If so, it need to be dealt with in time.
two. Clean the hydraulic pump after one particular 12 months of operation of the elevator carry, and exchange the severely worn rotating and transmission parts this sort of as shaft pins.
three. After the elevator raise has been managing for 1 12 months, check no matter whether the handle circuit and electrical appliances are corroded and rusted, and whether or not the joints of the circuit are free, collapsed, rusted, etc. Uncover problems and deal with them in time.
4. Replace the hydraulic oil at the very least after every 6 months. If the frequency of use is high, substitute the hydraulic oil once each 3 months.
one. Is your solution CZPT?
Sure, simply because the problems are different, all products are CZPT dependent on element need! If you give us far more details about our merchandise, we will give you a really swift quote!
2. What is actually the information must I offer when inquiry?
The far more comprehensive data you offer, the a lot more exact remedy we can prepare for you! These kinds of as the potential, lift height, electricity resource or other specials you give us will be much more appreciated.
3. What is the least purchase amount?
It is a single set, and of program, the much more the much better.
four. Are you a manufacturer or a dealer?
We are a well-known hydraulic lift manufacturer in China. You are welcome to have a check out to our manufacturing unit.